964 C4 system tester options

[# 37]

Found a great system tester made by some fellas in the Netherlands who
wanted a low -cost option for the unobtainable 'Hammer'.
Going to run it this weekend and see how it stands up to the Bosch unit.

[Steve]

[# 37]

I will keep you up on how it does.
I do know it will bleed the C4 brake system, does a full DME analysis,PDAS, ABS...
Not sure whether you want / or if it is acceptable to post URL
or source for this device?
Also have a manual folks can look at that specifies and defines capabilites_

[Tom]

Ricardo and I had built and sold a set of testers, but we weren't able to implement PDAS locks due to the limits of Scantool. Do you have a different software?

[jstyer]

Wow... I would love to hear more about this. Keep us updated!

[# 37]

I just cued Steve on this to find out if we are ok to post the URL,
and contacts for these guys...will advise as soon as i hear from the Grand Pubah

yes, it does all the PDAS functions including ABS, HVAC....

[# 37]

OK_ we are all good on the sharing info tip.
Paul and Jens are the guys in the Netherlands who wanted a way
to communicate with their 928s.
Covers the 964, 964 C4 etc too.
They developed a clone of the Bosch 9288 'Hammer'
Rather than go into all the functions you can download their manual and it goes into all the specifics.
Comes with the 19 pin connector that plugs into the right front footwell port.
http://jenniskens.livedsl.nl/diag/Diag.htm

if theu ok it i will post their email contact [ but it is in the URL as well]

[tokoro]

I found this Scanner software haven't use it but seems really interesting the only thing is that it doesn't bleed the PDAS.

www.porschehvac.bergvill.com

[Steve]

[newsboy]

This link does not seem to work http://jenniskens.livedsl.nl/diag/Diag.htm
does anyone have a correct link to the tester?