....
6 posts
• Page 1 of 1
....
by Litle brother » Thu Jan 03, 2019 3:15 pm
....
Last edited by Litle brother on Thu May 23, 2019 1:42 pm, edited 1 time in total.
- Litle brother
- Posts: 67
- Joined: Mon Feb 11, 2013 10:45 am
Re: Best rocker arm choice with racing springs
by Steve » Sun Jan 06, 2019 5:29 pm
Hi Eskild,
FWIW, I use the stock rockers (properly reconditioned, of course) for all of our street and race engines.
Several of the prototype Pauters have failed and I have no experience with the Schrick ones.
Unless your valve spring pressures are crazy and you are using the correct oil, you should not have a problem provided they OEM rockers have been correctly reconditioned.
FWIW, I use the stock rockers (properly reconditioned, of course) for all of our street and race engines.
Several of the prototype Pauters have failed and I have no experience with the Schrick ones.
Unless your valve spring pressures are crazy and you are using the correct oil, you should not have a problem provided they OEM rockers have been correctly reconditioned.
- Steve
- Site Admin
- Posts: 418
- Joined: Sun Jan 27, 2013 12:16 am
Re: Best rocker arm choice with racing springs
by Litle brother » Thu Jan 24, 2019 2:58 pm
....
Last edited by Litle brother on Thu May 23, 2019 1:43 pm, edited 2 times in total.
- Litle brother
- Posts: 67
- Joined: Mon Feb 11, 2013 10:45 am
Re: Best rocker arm choice with racing springs
by Steve » Fri Jan 25, 2019 10:47 pm
- Steve
- Site Admin
- Posts: 418
- Joined: Sun Jan 27, 2013 12:16 am
Re: Best rocker arm choice with racing springs
by Litle brother » Wed Apr 24, 2019 2:10 am
....
Last edited by Litle brother on Thu May 23, 2019 1:44 pm, edited 1 time in total.
- Litle brother
- Posts: 67
- Joined: Mon Feb 11, 2013 10:45 am
Re: Best rocker arm choice with racing springs
by Steve » Fri Apr 26, 2019 6:01 am
Hi Eskild,
Based on what I see after 45 years of doing 911's, my advice stands.
Based on what I see after 45 years of doing 911's, my advice stands.
- Steve
- Site Admin
- Posts: 418
- Joined: Sun Jan 27, 2013 12:16 am
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests